Grading Instructions
The law requires that each position be classified to the appropriate series and grade according to standards issued by OPM. If no directly applicable standard has been issued, then positions must be classified consistent with OPM standards covering other occupations. Positions classified under the 0346 Logistics Management Series cover two-grade interval work. (For more information on selecting the appropriate standard, see the Introduction to the Position Classification Standards.)
For most positions the published standard for the series in which the position is classified will provide the best grade level criteria for evaluating the position. Other standards would be used primarily to confirm the initial evaluation. When no directly applicable grade level criteria have been published, you must select other standards for cross series comparison. You should select standards that cover work as similar as possible to the work you are evaluating with respect to the kind of work process, function, or subject matter involved; the qualifications (competencies knowledge, skills, and abilities) required; the level of difficulty and responsibility; and the combination of classification factors that have the greatest influence on the grade level.
Because of the differences in the nature of work and the qualifications required to do various kinds of work, you should use for comparison only standards or guides that are compatible with the work being evaluated. Thus, professional positions should be evaluated against standards for professional work that are comparable in scope and difficulty, and as nearly equal as possible in subject matter and function. Standards selected for evaluating technical work should involve similar grading factors and skill levels. Clerical positions should be evaluated by standards for related kinds of clerical work or by an appropriate guide.
Positions assigned administrative work should be classified by application of standards or guides that cover occupations that are as similar as possible to the work performed and the knowledge and skills required. In rare instances, a standard for a professional occupation may provide the best source of grade level criteria for evaluating a nonprofessional position. This situation may occur when the work of the nonprofessional, or administrative, position is performed in an organization where the work is primarily professional. The administrative work may be closely related to the professional work but does not require the same level of qualifications.
Caution and sound classification judgment must be exercised, however, when comparing administrative work, (i.e., logistics management) to criteria for an occupation which requires professional knowledge and skills. Logistics management work does not require the same depth of knowledge as that described in standards covering professional engineering work. Therefore, it is important to carefully balance the duties and responsibilities of the logistics management positions with criteria for professional work and make whatever adjustments are appropriate before arriving at a final grade.
As when using any standard for cross series comparison, you must use care and judgment to be sure that the overall intent of a factor level or narrative description of a grade level is met. You must not match positions and grade level criteria solely on the basis of superficial word matching or similarities between organizational echelon, scope of program goals and requirements, or kind of supervision given or received. Your evaluation should not be based on a single classification factor, on a description of an isolated task or responsibility, or on words or sentences taken out of context. Rather, you must make a careful analytical comparison of the relationship of the position being evaluated with the intent of the criteria being used.
Positions in this occupation must be evaluated by reference to standards which include grade level criteria for analogous kinds of work. The different types of work covered by this series may require reference to one or more standards, depending upon the exact nature of the position to be classified. When selecting standards for cross-reference, consideration should be given to the similarity of the knowledge and skills required, the methodology used to perform the work, and to some degree the similarity of the subject matter involved.
Logistics management work is typically staff work and requires the application of analytical and problem-solving techniques at the grade level 9 and above. Therefore, reference to the grade level criteria covering management analysis work will prove useful in many instances. Standards for other kinds of analytical occupations, such as the Administrative Analysis Grade Evaluation Guide or the Job Family Position Classification Standard for Professional and Administrative Work in the Accounting and Budget Group, 0500,may provide useful guidelines.
Other standards which may provide criteria for work related to some logistics management positions include portions of the standard for the Housing Management Series, 1173, which covers housing program evaluation; the Supply Program Management Series, 2003 , Grade Evaluation Guide for Supply Positions and the Inventory Management Series, 2010.
For trainee and developmental positions (i.e. grade levels 5 and 7), follow the guidance provided in the Administrative Analysis Grade Evaluation Guide.
As when using any standard for cross series comparison, care and judgment must be used to be sure that the overall intent of a factor level or narrative description of a grade level is credited.
Positions and grade level criteria must not be matched on the basis of superficial similarities between organizational echelon, scope of program goals and requirements, or degree of direction or supervision received. Rather, a careful analytical comparison must be made of the relationship of the duties and responsibilities assigned to the position being evaluated with the intent of the criteria being used. The Primary Standard may be used only in conjunction with another Factor Evaluation System (FES) standard and only when the position falls below the lowest factor level or exceeds the highest factor level described in the FES standard.
Evaluate leader positions using the General Schedule Leader Grade Evaluation Guide.
Evaluate supervisory positions using the criteria in the General Schedule Supervisory Guide.

